C2177
DTC C2177/77 Initialization not CompletedDESCRIPTION
The initialization procedure starts when the tire pressure warning reset switch is pressed for 3 seconds or more with the power switch in the ON (IG) position.
The tire pressure warning ECU registers the tire pressure data signals from the tire pressure warning valve and transmitter, and blinks the tire pressure warning light 3 times at 1 second intervals.
INSPECTION PROCEDURE
NOTICE:
^ When replacing the tire pressure warning ECU, read the IDs stored in the ECU using the intelligent tester and note them down before removal.
^ It is necessary to perform initialization after registration the transmitter IDs into the tire pressure warning ECU after the tire pressure warning ECU and/ or tire pressure warning valve and transmitter have been replaced. Initialization
