C1364

DTC C1364/61 Wheel Cylinder Pressure Sensor Malfunction

DESCRIPTION

DTC Detection Condition (Part 1):

DTC Detection Condition (Part 2):

DTC Detection Condition (Part 3):

The master cylinder pressure sensor and the wheel cylinder pressure sensor are built into the brake actuator, and measure the master cylinder pressure and the wheel cylinder pressure sent to the skid control ECU.

DTC C1281/81 can be detected when the master cylinder pressure sensor sends a master cylinder pressure signal or test mode ends. DTC C1281/81 is output only in test mode.

Wiring Diagram:

INSPECTION PROCEDURE

NOTE: When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration. Initialization

Step 1:

Step 2-4:

Step 4(Continued):