Variable Induction Control Solenoid: Service and Repair

ACIS VACUUM SWITCHING VALVE (VSV) REMOVAL AND INSTALLATION

Components:

COMPONENTS FOR REMOVAL AND INSTALLATION

VACUUM TANK REMOVAL

1. REMOVE OIL DIPSTICK AND GUIDE FOR A/T
- Remove the bolt.

A/T Dipstick Guide:

- Pull out the dipstick guide together with the dipstick.

INSTALLATION HINT: Apply soapy water to the O-ring, and push in the dipstick guide.

- Remove the O-ring from the dipstick guide.

INSTALLATION HINT: Use a new O-ring.

2. REMOVE VACUUM TANK AND VSV ASSEMBLY

Vacuum Tank:

- Remove the 2 nuts, and disconnect the vacuum tank from the intake manifold.

Torque: 21 N.m (210 kgf.cm, 15 ft.lbf)

Vacuum Tank Connections:

- Disconnect the connector and hoses, and remove the vacuum tank and VSV assembly:
(1) VSV connector
(2) Vacuum hose (from air intake chamber) from port B of vacuum tank
(3) Vacuum hose (from actuator) from VSV
3. REMOVE VSV FROM VACUUM TANK
- Disconnect the vacuum hose from port A of the vacuum tank.
- Remove the screw and VSV.

ACIS VACUUM SWITCHING VALVE (VSV) REMOVAL AND INSTALLATION

INSTALLATION HINT: Installation is in the reverse order of removal.