Installation

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: INSTALLATION

INSTALLATION

1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Using a torque wrench, install the bolt [B].





Torque: 20 Nm (204 kgf-cm, 14 ft-lbf)
2. INSTALL SHIFT LEVER ASSEMBLY






(a) Using a torque wrench, install the 4 bolts.
Torque: 21 Nm (214 kgf-cm, 12.6 ft-lbf)
3. INSTALL DEFROSTER NOZZLE OPENING PLATE NO.1
4. INSTALL FRONT NO.2 SPEAKER ASSEMBLY
5. INSTALL FRONT NO.1 SPEAKER ASSEMBLY
6. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY NO.2
7. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
8. INSTALL FRONT PILLAR GARNISH RH
9. INSTALL FRONT PILLAR GARNISH LH
10. INSTALL INTEGRATION CONTROL & PANEL ASSEMBLY
11. INSTALL RADIO RECEIVER ASSEMBLY
12. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY
13. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
14. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER
15. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
16. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING ASSEMBLY
17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
18. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2
19. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1
20. INSTALL FLOOR CARPET COVER CENTER RH
21. INSTALL FLOOR CARPET COVER CENTER LH
22. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY NO.3
23. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY NO.1
24. INSTALL INSTRUMENT SIDE PANEL RH
25. INSTALL INSTRUMENT SIDE PANEL LH
26. INSTALL INSTRUMENT PANEL BOX NO.2
27. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
28. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
29. INSTALL INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY NO.1
30. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH
31. INSTALL COWL SIDE TRIM BOARD RH
32. INSTALL COWL SIDE TRIM BOARD LH
33. INSTALL FRONT DOOR SCUFF PLATE RH
34. INSTALL FRONT DOOR SCUFF PLATE LH
35. INSTALL COMBINATION METER ASSEMBLY
36. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
37. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
38. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
39. INSTALL SPIRAL CABLE SUB-ASSEMBLY
40. INSTALL STEERING COLUMN COVER
41. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation

42. INSTALL STEERING WHEEL ASSEMBLY Installation

43. INSTALL HORN BUTTON ASSEMBLY Installation

44. INSTALL STEERING WHEEL COVER LOWER NO.2
45. INSTALL STEERING WHEEL COVER LOWER NO.3
46. CONNECT BATTERY NEGATIVE TERMINAL
47. INSPECT HORN BUTTON ASSEMBLY Installation

48. INSPECT SRS WARNING LIGHT Installation