Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Engage the 4 claws and install the front bumper cover.
(b) Connect the connectors.
HINT: If vehicle equipped with fog lights or ultrasonic sensors, connect the connectors.

(e) Install the 2 pin hold clips.
HINT: Use the same procedure for the RH side and LH side.

(f) Install the clip.
HINT: Use the same procedure for the RH side and LH side.

(g) Install the screw.
HINT: Use the same procedure for the RH side and LH side.

2. INSTALL FRONT END PANEL LH (w/o Headlight Cleaner System) Installation

3. INSTALL FRONT END PANEL RH (w/o Headlight Cleaner System)
HINT: Use the same procedure as for the LH side.

4. INSTALL FRONT END PANEL LH (w/ Headlight Cleaner System) Installation

5. INSTALL FRONT END PANEL RH (w/ Headlight Cleaner System)
HINT: Use the same procedure as for the LH side.

6. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

7. PREPARE FOR HEADLIGHT AIMING (for Using a Tester) Adjustments

8. PREPARE FOR HEADLIGHT AIMING (for Using a Screen) Adjustments

9. INSPECT HEADLIGHT AIMING Adjustments

10. ADJUST HEADLIGHT AIMING Adjustments

11. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

12. PREPARE FOR FOG LIGHT AIMING Adjustments

13. INSPECT FOG LIGHT AIMING Adjustments

14. ADJUST FOG LIGHT AIMING Adjustments