Installation

GF1A TRANSFER: TRANSFER ASSEMBLY: INSTALLATION

INSTALLATION





1. INSTALL TRANSFER ASSEMBLY
(a) Install the transfer to the transaxle with the 6 nuts and 2 bolts.
Torque: 69 Nm (700 kgf-cm, 51 ft-lbf)
2. REMOVE REAR ENGINE MOUNTING BRACKET (for 2GR-FE)

3. INSTALL REAR ENGINE MOUNTING BRACKET (for 2AZ-FE) Installation

4. INSTALL ENGINE ASSEMBLY WITH AUTOMATIC TRANSAXLE
(a) for 2GR-FE:
Install the engine with automatic transaxle.
(b) for 2AZ-FE:
Install the engine with automatic transaxle.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL