Slip Indicator Light Remains On

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: Slip Indicator Light Remains ON

Slip Indicator Light Remains ON

DESCRIPTION

The slip indicator blinks during VSC and/or TRAC operation.
When the system fails, the slip indicator comes on to warn the driver.
For 2WD: With Auto LSD switch ON, when the hydraulic brake booster is at a high temperature, the slip indicator illuminates.

WIRING DIAGRAM





INSPECTION PROCEDURE
NOTE: When replacing the ABS and TRACTION actuator, perform the zero point calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM
(a) Check if the CAN communication system DTC is output Diagnosis System.

Result





B -- REPAIR CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. CHECK SKID CONTROL ECU CONNECTOR
(a) Check if the skid control ECU connector is securely connected.
OK:
The connector is securely connected.
NG -- CONNECT CONNECTOR CORRECTLY
OK -- Continue to next step.
3. CHECK COMBINATION METER
(a) Check the combination meter How To Proceed With Troubleshooting.
NG -- REPLACE COMBINATION METER
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY