Removal

LIGHTING: LUGGAGE ROOM LIGHT: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR CENTER GARNISH Disassembly

3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

5. REMOVE BACK DOOR TRIM BOARD Disassembly

6. REMOVE BACK DOOR COURTESY LIGHT ASSEMBLY






(a) Using a screwdriver, pry out the light as shown in the illustration.
HINT: Tape the screwdriver tip before use.





(b) Detach the 4 claws and remove the light shade.






(c) Remove the light bulb from the light.