VSC Warning Light Does Not Come On

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: VSC Warning Light does not Come ON

VSC Warning Light does not Come ON

DESCRIPTION

Refer to the description of "VSC Warning Light Remains ON" VSC Warning Light Remains On.

WIRING DIAGRAM

Refer to the VSC warning light circuit VSC Warning Light Remains On.

INSPECTION PROCEDURE
NOTE: When replacing the ABS and TRACTION actuator, perform the zero point calibration Programming and Relearning.

PROCEDURE

1. INSPECT CAN COMMUNICATION SYSTEM
(a) Check if the CAN communication system DTC is output Diagnosis System.

Result





B -- REPAIR CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM (VSC WARNING LIGHT)
(a) Select the Active Test, generate a control command, and then check that the VSC warning light operates.

ABS / VSC / TRAC:





OK:
The VSC warning light turns on or off.
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY
NG -- Continue to next step.
3. CHECK COMBINATION METER ASSEMBLY
(a) Check the combination meter How To Proceed With Troubleshooting.
NG -- REPLACE COMBINATION METER ASSEMBLY
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY