Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER SIDE RETAINER LH
(a) Install the clip and bumper side retainer.

(b) Install the bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
2. INSTALL FRONT BUMPER SIDE RETAINER RH
HINT: Use the same procedures described for the LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT

(a) Install the reinforcement with the 8 bolts.
Torque: 70 Nm (713 kgf-cm, 51 ft-lbf)

(b) Install the wire harness and attach the 5 claws.
4. INSTALL FRONT BUMPER RETAINER

(a) Install the bolt with the retainer.
5. INSTALL NO. 2 FRONT BUMPER ENERGY ABSORBER

(a) Install the absorber.
6. INSTALL FRONT BUMPER COVER
(a) Put protective tape under the front fender and headlight.

(b) Install the 4 clips.

(e) Attach the 4 claws to install the bumper cover.

(f) Install the 8 screws.
7. INSTALL RADIATOR SUPPORT OPENING COVER

(a) Install the 2 clips.
8. INSTALL RADIATOR GRILLE PROTECTOR

(a) Install the 2 radiator grille protectors.
9. INSTALL FRONT FENDER LINER LH

(a) Install the fender liner with the fender liner retainer.
(b) w/ Splash Shield:
Install the front fender splash shield LH.
(c) Install the screw, nut and bolt.
10. INSTALL FRONT FENDER LINER RH
HINT: Use the same procedures described for the LH side.

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL