Disassembly

EXTERIOR: FRONT BUMPER: DISASSEMBLY

DISASSEMBLY

1. REMOVE HOOD TO RADIATOR GRILLE SEAL






(a) Detach the 9 clips and remove the hood to radiator grille seal.
2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY






(a) Remove the 4 bolts and 4 nuts.






(b) Detach the 6 claws and remove the radiator grille.
3. REMOVE NO. 1 RADIATOR GRILLE LOWER






(a) Detach the 16 claws and remove the radiator grille.
4. REMOVE NO. 2 RADIATOR GRILLE LOWER






(a) Detach the 16 claws and remove the radiator grille.
5. REMOVE FRONT BUMPER ARM HOLE COVER LH






(a) Detach the 2 claws and disconnect the arm hole cover.
(b) Remove the hook and bumper arm hole cover.
6. REMOVE FRONT BUMPER ARM HOLE COVER RH
(a) Use the same procedures described for the LH side.
7. REMOVE FOG LIGHT ASSEMBLY LH






(a) Remove the screw and fog light.
(b) Remove the 3 bolts and fog light mounting bracket.
8. REMOVE FOG LIGHT ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

9. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)






(a) Remove the 3 bolts, bumper hole cover and fog light mounting bracket.
10. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
HINT: Use the same procedures described for the LH side.

11. REMOVE FRONT BUMPER EXTENSION LH (for Wide Body)






(a) Detach the 7 outside moulding retainers and remove the extension LH.
- If reusing the extension, take care not to damage the extension.
- Be careful not to damage the vehicle body.

12. REMOVE FRONT BUMPER EXTENSION RH (for Wide Body)
HINT: Use the same procedures described for the LH side.