Removal

WIPER AND WASHER: REAR WIPER MOTOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR CENTER GARNISH Disassembly

3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

5. REMOVE BACK DOOR TRIM BOARD Disassembly

6. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY






(a) Widen each end of the cap 5 mm (0.19in).






(b) Lift the both widened ends of the cap.






(c) Rotate the cap. Fix the cap in place.






(d) Remove the nut and arm and blade.
7. REMOVE REAR WIPER MOTOR GROMMET






8. REMOVE REAR WIPER MOTOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and wiper motor.