Installation

U241E AUTOMATIC TRANSAXLE: TRANSMISSION OIL COOLER: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION OIL COOLER





(a) Install the oil cooler to the bracket with the 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)






(b) *1: Connect the No. 1 oil cooler outlet hose to the transmission.
(c) *2: Connect the No. 1 oil cooler inlet hose to the transmission.
(d) *3: Connect the No. 3 water by-pass hose to the transmission.
(e) *4: Connect the No. 4 water by-pass hose to the transmission.
2. ADD AUTOMATIC TRANSAXLE FLUID
3. INSPECT AUTOMATIC TRANSAXLE FLUID
(a) Inspect the automatic transaxle fluid Procedures.
4. ADD COOLANT
(a) Add the coolant.