Installation

2AZ-FE COOLING: THERMOSTAT: INSTALLATION

INSTALLATION

1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.






(b) Install the thermostat with the jiggle valve upward.
HINT: The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL WATER INLET






(a) Install the water inlet with the 2 nuts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
3. CONNECT NO. 2 RADIATOR HOSE
4. ADD ENGINE COOLANT Service and Repair

5. INSPECT FOR COOLANT LEAK Testing and Inspection

6. INSTALL RADIATOR SUPPORT OPENING COVER
7. INSTALL NO. 1 ENGINE UNDER COVER