Slip Indicator Light Does Not Come On

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: Slip Indicator Light does not Come ON

Slip Indicator Light does not Come ON

DESCRIPTION

Refer to the description of "Slip Indicator Light Remains ON" Slip Indicator Light Remains On.

WIRING DIAGRAM

Refer to the SLIP indicator light circuit Slip Indicator Light Remains On.

INSPECTION PROCEDURE
NOTE: When replacing the ABS and TRACTION actuator, perform the zero point calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM
(a) Check if the CAN communication system DTC is output Diagnosis System.

Result





B -- REPAIR CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM (SLIP INDICATOR LIGHT)
(a) Using Techstream's Active Test, generate a control command, and then check that the SLIP indicator light operates.

ABS / VSC / TRAC:





OK:
The SLIP indicator light turns ON and OFF.
NG -- CHECK COMBINATION METER
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY
3. CHECK COMBINATION METER
(a) Inspect the combination meter How To Proceed With Troubleshooting.
NG -- REPLACE COMBINATION METER
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY