Skid Control Buzzer Circuit

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: Skid Control Buzzer Circuit

Skid Control Buzzer Circuit

DESCRIPTION

The skid control buzzer sounds while the VSC is activated.

WIRING DIAGRAM





INSPECTION PROCEDURE
NOTE: When replacing the ABS and TRACTION actuator, perform the zero point calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM
(a) Check if the CAN communication DTC is output Diagnosis System.

Result





B -- REPAIR CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM (SKID CONTROL BUZZER)
(a) Select the Active Test, generate a control command, and then check that the skid control buzzer operate.

ABS / VSC / TRAC:





OK:
The skid control buzzer can be heard.
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY
NG -- Continue to next step.
3. INSPECT COMBINATION METER
(a) Inspect the combination meter How To Proceed With Troubleshooting.
NG -- REPLACE COMBINATION METER
OK -- REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY