Component Tests and General Diagnostics

MIRROR: OUTER REAR VIEW MIRROR: INSPECTION

INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH






(a) Disconnect the mirror connector.
(b) Apply battery voltage and check the operation of the mirror.
OK:





If the result is not as specified, replace the mirror assembly.






(c) w/ Mirror Heater:
Check the resistance.
(1) Measure the resistance between the terminals.
Standard resistance:






If the result is not as specified, replace the outer rear view mirror.
(2) Connect the cable from the negative battery (-) terminal to terminal 5 and the positive battery (+) terminal to terminal 4, then check that the mirror becomes warm.
OK:
Mirror becomes warm.
HINT: It takes a short time for the mirror to become warm.

If the result is not as specified, replace the outer rear view mirror.
2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH






(a) Disconnect the mirror connector.
(b) Apply battery voltage and check the operation of the mirror.
OK:





If the result is not as specified, replace the mirror assembly.






(c) w/ Mirror Heater:
Check the resistance.
(1) Measure the resistance between the terminals.
Standard resistance:






If the result is not as specified, replace the outer rear view mirror.
(2) Connect the cable from the negative battery (-) terminal to terminal 5 and the positive battery (+) terminal to terminal 4, then check that the mirror becomes warm.
OK:
Mirror becomes warm.
HINT: It takes a short time for the mirror to become warm.

If the result is not as specified, replace the outer rear view mirror.