Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the connectors.






(b) Engage the clamp.






(c) Engage the claw and install the headlight assembly with the bolt and 2 screws.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL REAR FENDER SPLASH SHIELD SUB-ASSEMBLY






(a) Engage the 3 clips and 3 guides, and install the rear fender splash shield sub-assembly.
3. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light) Installation

4. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light) Installation

5. INSTALL RADIATOR GRILLE Installation

6. INSTALL COOL AIR INTAKE DUCT SEAL Installation

7. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

8. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

9. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) Adjustments

10. INSPECT HEADLIGHT AIMING Adjustments

11. ADJUST HEADLIGHT AIMING Adjustments

12. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments

13. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

14. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

15. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments