Installation

EXTERIOR: FENDER LINER (for Front Side): INSTALLATION

INSTALLATION

1. INSTALL FRONT FENDER LINER LH






(a) Install the front fender liner LH with the 5 clips and 8 screws.






(b) Install 2 new grommets.
(c) Using a 4 mm hexagon wrench, install the 2 screws.






(d) Install the screw and pin hold clip.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
2. INSTALL FRONT FENDER LINER RH






(a) Install the front fender liner RH with the 5 clips and 7 screws.






(b) Install 2 new grommets.
(c) Using a 4 mm hexagon wrench, install the 2 screws.






(d) Install the screw and pin hold clip.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
3. INSTALL FRONT WHEEL OPENING EXTENSION PAD (for LH Side)






(a) Install the front wheel opening extension pad with the 2 screws.
4. INSTALL FRONT WHEEL OPENING EXTENSION PAD (for RH Side)
HINT: Use the same procedure for the RH side and LH side.

5. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH Installation

6. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH
HINT: Use the same procedures for the RH side and LH side.

7. INSTALL NO. 1 ENGINE UNDER COVER

8. INSTALL ENGINE UNDER COVER ASSEMBLY