Installation

VF2A TRANSFER: TRANSFER ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER ASSEMBLY
(a) Install the transfer onto the transmission.
(b) Install the 2 clamps and 8 bolts.
Torque: 24 Nm (244 kgf-cm, 17 ft-lbf)
2. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
(a) Install the automatic transmission Installation.






3. INSTALL LOWER TRANSFER CASE PROTECTOR
(a) Install the protector with the 4 bolts.
Torque: 18 Nm (183 kgf-cm, 13 ft-lbf)
4. ADD TRANSFER OIL VF2A Transfer Case

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. PERFORM INITIALIZATION
(a) Perform initialization Programming and Relearning.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

7. CHECK FOR TRANSFER OIL LEAKAGE