Removal

DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT WHEEL
3. REMOVE NO.1 ENGINE UNDER COVER SUB-ASSEMBLY
4. REMOVE REAR ENGINE UNDER COVER ASSEMBLY
5. DRAIN DIFFERENTIAL OIL
6. REMOVE FRONT PROPELLER SHAFT ASSEMBLY Removal

7. SEPARATE SPEED SENSOR FRONT LH Removal

8. SEPARATE FRONT SPEED SENSOR RH
HINT: Use the same procedure as for the RH side.

9. REMOVE FRONT AXLE HUB GREASE CAP LH Removal

10. REMOVE FRONT AXLE HUB GREASE CAP RH
HINT: Use the same procedure as for the RH side.

11. SEPARATE TIE ROD END SUB-ASSEMBLY LH Removal

12. SEPARATE TIE ROD END SUB-ASSEMBLY RH
13. SEPARATE FRONT LOWER BALL JOINT ATTACHMENT Removal

14. REMOVE FRONT AXLE HUB NUT LH Removal

15. REMOVE FRONT AXLE HUB NUT RH
HINT: Use the same procedure as for the RH side.

16. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH Removal

17. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
HINT: Use the same procedure as for the RH side.

18. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY





(a) Remove the bolt and disconnect the differential breather tube bracket.
(b) Support the differential with a jack.
(c) Remove the No. 1 differential mounting nut.
(d) Remove the 2 mounting bolts and 2 nuts.
(e) Lower the jack and remove the front differential.






(f) Remove the 3 bolts and front No. 1 differential support.






(g) Remove the 2 bolts and front No. 2 differential support.






(h) Remove the 2 bolts and front No. 3 differential support.