Blower Unit

AIR CONDITIONING: BLOWER UNIT:

INSPECTION

1. INSPECT AIR INLET CONTROL SERVO MOTOR






(a) Inspect the servo motor operation.
(1) Connect the positive (+) lead from the battery to terminal 5 (IG+) and negative (-) lead to terminal 1 (FRS), then check that the lever turns to the FRESH side smoothly.
Standard:
The motor operates smoothly.
If the operations are not as specified, replace the air inlet control servo motor.
(2) Connect the positive (+) lead from the battery to terminal 5 (IG+) and negative (-) lead to terminal 2 (REC), then check that the lever turns to the RECIRCULATION side smoothly.
Standard:
The motor operates smoothly.
If the operations are not as specified, replace the air inlet control servo motor.