Disassembly

PARKING BRAKE ASSEMBLY: DISASSEMBLY

DISASSEMBLY





1. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING
(a) Using needle-nose pliers, remove the 2 return tension springs.
2. REMOVE PARKING BRAKE SHOE STRUT
(a) Remove the parking brake shoe strut and compression spring.






3. REMOVE PARKING BRAKE SHOE
(a) Remove the 2 hold down spring cups, hold down compression spring and hold down spring pin.
(b) Disconnect the return tension spring and remove the No. 2 shoe.
(c) Remove the shoe adjusting screw set and return tension spring.
(d) Remove the 2 hold down spring cups, hold down compression spring and hold down spring pin.
(e) Using needle-nose pliers, disconnect the parking brake cable and remove the No. 1 shoe.






4. REMOVE PARKING BRAKE SHOE LEVER
(a) Using a screwdriver, remove the C-washer.
(b) Remove the shim and parking brake shoe lever from the No. 1 shoe.