Removal

ENGINE IMMOBILISER: TRANSPONDER KEY AMPLIFIER: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH
HINT: Use the same procedure as for the RH side Removal.

2. REMOVE FRONT FLOOR FOOTREST Removal

3. REMOVE FOOTREST CLIP Removal

4. REMOVE COWL SIDE TRIM BOARD LH
HINT: Use the same procedure as for the RH side Removal.

5. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side Removal.

6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal







8. REMOVE INSTRUMENT PANEL FINISH PLATE
(a) Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.






9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
(a) Remove the 2 bolts.
(b) Disengage the claw and 5 clips and remove the lower instrument panel finish panel.






10. REMOVE TRANSPONDER KEY AMPLIFIER
(a) Disconnect the connector.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the transponder key amplifier.