Evaporator Core: Service and Repair

REMOVAL







1. REMOVE COOLING UNIT
Service and Repair

2. REMOVE EVAPORATOR
a. Using a knife, cut off each packing.
b. Remove the 3 screws and 3 clips, separate the upper and lower case, then remove the evaporator.

INSTALLATION HINT: If evaporator was replaced, add compressor oil to the compressor.

Add 40 cc (1.4 fl.oz.)
Compressor oil: ND-OIL 8 or equivalent

INSTALLATION
Installation is in the reverse order of removal.


INSPECTION
1. CHECK EVAPORATOR FINS FOR BLOCKAGE
If the fins are clogged, clean them with compressed air.

NOTE: Never use water to clean the evaporator.

2. CHECK FITTINGS FOR CRACKS OR SCRATCHES
Repair as necessary.