B1312

DTC B1312: OCM Sensor Mat Fault

DTC Will be Set When
SDM receives internal errors OCM electronics fault or/and sensor mat fault signal from OCM.

DTC Troubleshooting
1. Turn ignition switch OFF.
2. Replace OCM with sensor mat referring to OCM with Sensor Mat Removal and Installation:Advanced Air Bag.

NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC Clearance:Advanced Air Bag, if any.
- Repeat Air Bag Diagnostic System Check:Advanced Air Bag to confirm that the trouble has been corrected.