B1015

DTC B1015: "PASS AIR BAG OFF" Warning Light Circuit Failure

WIRING DIAGRAM:

Wiring Diagram:

DTC Will be Set When
The voltage at the "PASS AIR BAG OFF" warning light circuit terminal "G46-10" does not match the commanded state of the warning light driver for specified time.

Flow Test Description
Step 2: Check for "METER" fuse blown.
Step 3: Check for "PASS AIR BAG OFF" warning light circuit.
Step 4: Check for "PASS AIR BAG OFF" warning light circuit.
Step 5: Check if malfunction is in center panel indicator included in HVAC control module.

DTC Troubleshooting

Step 1-3:

Step 4-5:

NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC Clearance:Advanced Air Bag, if any.
- Repeat Air Bag Diagnostic System Check:Advanced Air Bag to confirm that the trouble has been corrected.