B1061

DTC B1061: "AIR BAG" Warning Lamp Circuit Failure

Wiring Diagram:

CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:H25 Engine Model before starting diagnosis according to flow. Diagnostic Strategies
- When measurement of resistance or voltage is required in this flow, use a tester along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittent and Poor Connections:H25 Engine Model. Intermittents and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.

DTC Will Set when
The voltage at the "AIR BAG" warning lamp circuit terminal "G58-2" does not match the commanded state of the warning lamp driver for specified time.

Flow Test Description
Step 1: This test rechecks "AIR BAG" warning lamp operation.
Step 2: This test rechecks whether an abnormality is in SDM.

Step 1 - 2:

DTC Troubleshooting