B1019

DTC B1019: Passenger Air Bag Initiator Circuit Short to Power Circuit

Wiring Diagram:

CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:H25 Engine Model before starting diagnosis according to flow. Diagnostic Strategies
- When measurement of resistance or voltage is required in this flow, use a tester along with a correct terminal adaptor from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittent and Poor Connections:H25 Engine Model. Intermittents and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.

DTC Will Set when
The voltage measured at passenger air bag initiator circuit is above a specified value for specified time.

Flow Test Description
Step 1: Check if malfunction is in passenger air bag (inflator) module.
Step 2: Check passenger air bag (inflator) module initiator circuit.
Step 3: Check passenger air bag (inflator) module initiator circuit.

Step 1:

Step 2 - 3:

DTC Troubleshooting