576655 Replacing Additional Window Frame Seal

WM 576655 Replacing additional window frame seal

Preliminary work

1. Remove door window glass. -> 644019 Removing and installing front door window - section on "Removing" 644019 Removing and installing front door window

Replacing additional window frame seal





Installation position of additional window frame seal

1. Remove additional seal.





Removing additional window frame seal

1.1. Unclip additional seal at the top -A-.
1.2. Lever off additional seal -B- and remove it.

Information

- Immediately before sticking on, wash off the areas on which you intend to stick the seal using isopropanol to ensure that all traces of silicone, grease and oil are completely removed.

2. Install new additional seal for window frame.
2.1. Clip in additional seal at the top.





Clipping in additional seal

2.2. Position front edge of additional seal on the guide rail for the corner window pane.





Sticking on additional seal

2.3. Pull off the protective film on the front edge -A- and pull it out under the additional seal. Press the additional seal on at the same time.
2.4. Align the additional seal towards the rear.
2.5. Pull off the protective film on the lower edge -B- and pull it out under the additional seal. Press the additional seal on at the same time.
2.6. Align the additional seal at the rear edge.
2.7. Pull off the protective film on the rear edge -C- and pull it out under the additional seal. Press the additional seal on at the same time.

Subsequent work

1. Install door window glass. -> 644019 Removing and installing front door window - section on "Installing" 644019 Removing and installing front door window