Shift Rail: Adjustments

Transmission Assembly:

Legend 1:

Legend 2:

- Install reverse gear selector rod.
- Install Special Tool 9106 and assemble reverse gears I and III.





- Install reverse gear II as shown in illustration.
- Place in 4th gear and torque nuts to specifications.
^ Torque pinion shaft nut to: 190-200 Nm (140-147 ft lb)
^ Torque drive shaft nut to: 160-180 Nm (118-133 ft lb)
- Remove reverse gear II again.





- Install operating lever for reverse gear. Reinstall reverse gear II.
- Adjust reverse gear selector rod.








- Adjust selector rods so that there is play of 0, 5 mm at tightest position between selector rod forks.