Engine Mount Strut Bracket Replacement

Engine Mount Strut Bracket Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right engine splash shield.
3. Remove the engine mount strut.
4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the engine mount strut bracket and the bolts.
^ Tighten the engine mount strut bracket bolts to 66 Nm (49 ft. lbs.).
2. Install the engine mount strut.
3. Install the right engine splash shield.
4. Lower the vehicle.