Engine Mount Bracket Replacement
Engine Mount Bracket ReplacementRemoval Procedure
1. Remove the engine mount.
2. Raise the engine enough to gain clearance in order to remove the upper bracket bolts (1).
3. Loosen the lower bracket bolt and remove the bracket (2) and the bolt together.
Installation Procedure
1. Install the lower bolt into the bracket.
2. Install the bracket (2) to the engine and hand tighten the lower bolt.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the upper bracket bolts (1).
^ Tighten all the bolts to 110 Nm (81 ft. lbs.).
4. Install the engine mount.