Rear

Transmission Mount Replacement - Rear

Removal Procedure
1. Raise the vehicle.
2. Remove the left front wheel.





3. Remove the front fender liner.





4. Remove the mount through bolt (1).
5. Remove the mount bolts.
6. Remove the mount.

Installation Procedure
1. Install the mount.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the mount bolts.
Tighten the bolts to 122 Nm (90 ft. lbs.).





3. Install the mount through bolt (1).
Tighten the bolt to 120 Nm (89 ft. lbs.).





4. Install the front fender liner.
5. Install the left front wheel.
6. Lower the vehicle.