Defroster Door Replacement

Defroster Door Replacement

Removal Procedure





Note: The defroster door must be closed to allow clearance during defroster duct removal.

1. Set the HVAC controls in the vent setting to close the defroster door.
2. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement Instrument Panel Carrier Replacement.
3. Remove the defroster cover bolts/screws (1).
4. Remove the defroster cover (2).
5. Remove the defrost actuator bolts/screws (4).
6. Remove the defrost actuator (3).
7. Remove the defrost actuator door (5).

Installation Procedure




1. Install the defrost actuator door (5).
2. Install the defrost actuator (3).

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the defrost actuator bolts/screws (4) and tighten to 1.2 Nm (11 lb in).
4. Install the defroster cover (2).
5. Install the defroster cover bolts/screws (1) and tighten to 1.2 Nm (11 lb in).
6. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement Instrument Panel Carrier Replacement.
7. Re-calibrate the actuators. Refer to Actuator Recalibration Programming and Relearning.