Rear Side Door Window Inner Sealing Strip Replacement

Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure

1. Lower the rear door window to the full open position.
2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair




3. Lift up on the rear door window inner belt sealing strip to remove from the rear door pinch-weld flange.

Installation Procedure





Important:
* Ensure the front end of the inner belt sealing strip is inserted into the gap formed by the weatherstrip and the door inner panel.

* Ensure the rear end of the inner belt sealing strip is flush to the rear leg of the weatherstrip but not interfering with the path of the window.


1. Align the rear door window inner belt sealing strip to the rear door pinch-weld flange.
2. Apply pressure to the rear door window inner belt sealing strip until fully seated.
3. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
4. Raise the window to the full closed position.