Assist Handle Replacement (W/out Lamp)

Assist Handle Replacement (W/out Lamp)

Removal Procedure




1. Pull down on the assist handle to expose the assist handle to roof retaining screws.
2. Front handle: Remove the assist handle to roof retaining screws (1).
3. Remove the assist handle from the vehicle.

Installation Procedure




1. Position the assist handle in the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the assist handle to roof retaining screws (1).

Tighten the assist handle screws to 3 Nm (27 lb in).