Removal And Installation

OIL PAN

Removal and Installation


REMOVAL

1.Drain CVT fluid from CVT. Changing.
2.Remove O-ring from drain plug.





3.Remove oil pan bolts.
- Black arrow indicates : Oil pan bolts
- White arrow indicates : Front
4.Remove oil pan.





5.Remove oil pan gasket (1) from oil pan (2).
6.Remove magnet (3) from oil pan.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Completely remove all moisture, oil and old gasket, etc. from the oil pan gasket mating surface of transaxle case and oil pan.
- Do not reuse oil pan gasket, O-ring and oil pan bolts.
- Apply CVT fluid to O-ring.
- Install the oil pan assembly to the transaxle case with the following procedure.
- Install the oil pan assembly to the transaxle case, and then temporarily tighten the oil pan bolts.

CAUTION:
Do not reuse oil pan bolts.
- Tighten the oil pan bolts in a criss cross pattern to the specified torque.
- Tighten the oil pan bolts again clockwise to the specified torque.