Removal And Installation With Climate Controlled Seats

FRONT SEAT

Removal and Installation


CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.

REMOVAL

NOTE:
Confirm the position of connector before starting work.
1.Slide the seat to the front most position.
2.Remove the rear slide covers.





a.Release the pawls (A).





b.Remove the rear slide covers.
3.Remove the rear mount bolts.
4.Slide the seat to the rear most position.





5.Remove the front slide covers.
6.Remove the front mount bolts.
7.Disconnect battery negative and positive terminals.

CAUTION:
Disconnect battery negative and positive terminals then wait for at least 3 minutes.
8.Disconnect harness connector under the seat and remove harness clamps.
9.Remove seat from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Clamp the harness in position.





- When installing the front seats tighten the driver seat bolts in the specified order as shown.





- When installing the front seats tighten the passenger seat bolts in the specified order as shown.