Removal And Installation

FRONT BUMPER

Removal and Installation


REMOVAL

1.Release the core support cover clips, then remove the core support cover.
2.Release the engine under cover clips, then remove engine under cover.
3.Remove the front fender protector side covers (RH/LH). Removal And Installation.
4.Remove both front fender protectors clips and screws from the front edge and partially remove, moving the protectors as necessary for access.
5.Remove the front bumper fascia clips and screws, then remove front bumper fascia.
6.Remove the fog lamps (if equipped). Xenon Type.
7.Remove the front grille. Service and Repair.
8.Remove the front energy absorbing foam.
9.Disconnect the harness connector, then remove the ambient temperature sensor.
10.Remove the upper fascia support bolts, then remove upper fascia support.
11.Remove the front bumper reinforcement bolts, then remove front bumper reinforcement.
12.Remove the front bumper support bolts, then remove the front bumper supports (RH/LH).

INSTALLATION

Installation is in the reverse order of removal.





mm (in)