Test A: The DC/AC Inverter Does Not Operate Correctly - No Power At The AC Power Point

PINPOINT TEST A: THE DC/AC INVERTER DOES NOT OPERATE CORRECTLY - NO POWER AT THE AC POWER POINT

Normal Operation
The DC/AC inverter receives 12 volts DC on circuits SBP04 (GN/RD) and CBP35 (YE/GY) and is grounded on circuit GD182 (BK/GY). The incoming DC power is internally converted to 60 cycle 110 volts AC power that is output to the AC power point on circuits HYA01 (OG/GN) (power) and HYA02 (OG/WH) (neutral).

NOTE:
- The electrical device that is powered by the AC power point must not exceed 150 watts.
- If the green LED is flashing, the AC power point may be overloaded, overheated or shorted. Unplug the electrical device from the AC power point and cycle the key. Refer to the Owner's Literature to determine if the electrical device is appropriate for the AC power point.

This pinpoint test is intended to diagnose the following:
- Fuses
- Circuits
- DC/AC inverter
- AC power point

A1:

A2 - A3:

A4: