Accelerator Slip Regulation (ASR) (DTC Memory [12])
Accelerator Slip Regulation (ASR)
Model 202 (up to 5/94)
Preparation for DTC Readout
1. Connect impulse counter scan tool or Hand-Held Tester (HHT) to data link connector (X11/4) according to connection diagram (see section 0).
Note:
Connect yellow wire from impulse counter scan tool to:
ABS/ASR control module (N30/1): socket 6
EA/CC/ISC control module (N4/1): socket 7
Engine control module (N3/4): socket 4
2. Ignition: ON
3. Read out DTC memory for control modules (N30/1, N4/1, N4/3)
Special Tools:
