Shifter A/T: Testing and Inspection

Selector Lever Inspection
1. Turn the ignition switch to the ON position (engine off).





2. With the brake pedal depressed, verify that "click" sound is heard at each range when shifted in the pattern shown.
3. Verify that the selector lever can only be shifted as shown.
4. Verify that a "click" sound is heard at each position when shifted from P position to 1 range.
5. Verify that the position of the selector lever and the indicator are aligned.
6. Verify that the position of the selector lever and the selector illumination light.
^ If not as specified, adjust the TR switch.
7. Verify that the vehicle operates in each selected range.