Throttle Cable/Linkage: Adjustments

1. Move the white locking tab A to the unlock position.
2. Turn stopper B to the unlock position.

NOTE: If the stopper B will not unlock, it may be necessary to carefully bend the tab C out by using a suitable tool.

3. To adjust the free play, push or pull the accelerator cable housing directly behind the spring.




4. Turn the stopper B to the lock position.

Free Play: 1 - 3 mm ( 0.04 - 0.11 in )

5. Measure the accelerator cable free play once again, making sure that it is within the specification.
6. Move the white locking tab A to the locked position.
7. Confirm correct accelerator operation.