Oil Pan: Service and Repair

Fig. 80 Oil Pan Replacement:

1. Remove oil pan in numbered sequence, Fig. 80. Remove main bearing support plate mounting bolt to main bearing cap, then main bearing support plate.
2. Install oil pan reversing numbered sequence, Fig. 80, noting the following:
a. Apply continuous bead of sealant to main bearing support plate along inside of bolt holes.
b. If old oil pan mounting bolts are used, remove sealant from bolt threads.

Fig. 81 Oil Pump Body & Rear Cover Gasket Installation:

c. Install gaskets onto oil pump body and rear cover with projections in notches, Fig. 81.
d. Tighten mounting bolts to specifications shown in Fig. 80.