Flow Chart 2 - Lamp Flashes Three Times

Possible Cause
- Weak battery
- Poor connection of connector








Step 1
Measurer the battery voltage.

Step 2

Warning
- Handling the SAS unit improperly can accidently deploy the air bags, which may seriously injure you. Read SERVICE WARNINGS before handling the SAS unit. Service Precautions

1. Carry out the "Before Servicing" procedure under GENERAL PROCEDURES. Service and Repair
2. (With passenger-side an bag module). Remove the passenger-side air bag module.

(Without passenger-side air bag module). Remove the glove compartment.

3. Disconnect the SAS unit connector.
4. Connect the negative battery cable.
5. Turn the ignition switch to ON.








6. Measure the voltage at the terminals of the SAS unit connector.