Selector Lever Inspection

SELECTOR LEVER INSPECTION

Selector Lever Inspection

1. Turn the ignition switch to the ON position. (engine OFF)

2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.






3. Verify that the selector lever can be shifted.

4. Verify that there is a "click" at each position when shifted from P position to M range.

5. Verify that the positions of the selector lever and the indicator are aligned.






- If there is any malfunction, adjust the TR switch. Service and Repair

6. Verify that the vehicle operates in each selected range.

Interlock Cable Inspection

1. Turn the ignition switch to the ON position. (engine off)

2. Remove the clip of the selector lever base plate, then remove the interlock cable from the U-groove.






3. Remove the interlock cable from the selector lever.

4. Verify that the interlock cable moves freely with the brake pedal depressed.






- If there is any malfunction, inspect the interlock cable for abnormal winding. If any abnormal winding found, correct it.
- If the malfunction persists after correcting the interlock cable winding, replace it.