Installation

WIPER / WASHER: REAR WIPER MOTOR: INSTALLATION

1. INSTALL REAR WIPER MOTOR ASSEMBLY

(a) Attach the 2 guides and temporarily install the rear wiper motor assembly with the 3 bolts.

(b) Tighten the 3 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Connect the connector.

2. INSTALL REAR WIPER ARM

(a) Clean the wiper arm serrations.





Text in Illustration





(b) Clean the wiper pivot serrations with a wire brush.





Text in Illustration





(c) Operate the rear wiper and stop the rear wiper motor at the automatic stop position.

HINT
The wiper motor does not operate if the back door and back door glass are not closed.

(d) Align the blade tip with the mark on the glass as shown in the illustration.





Standard:





Text in Illustration





(e) Install the rear wiper arm with the nut.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

HINT
Hold the wiper arm by hand while tightening the nut.

3. INSTALL REAR WASHER NOZZLE SUB-ASSEMBLY Installation

4. INSTALL REAR SPOILER SUB-ASSEMBLY Installation

5. INSTALL REAR SPOILER COVER RH Installation

6. INSTALL REAR NO. 1 SPOILER COVER Installation