Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. ADJUST SPIRAL CABLE Installation

2. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

3. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY Installation

4. INSTALL CRUISE CONTROL MAIN SWITCH Installation

5. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Attach the 2 claws to install the steering pad switch assembly.

(b) Install the 4 screws.

(c) Connect the connector.

6. INSTALL STEERING PAD ASSEMBLY Installation

7. INSTALL NO. 2 STEERING WHEEL LOWER COVER Installation

8. INSTALL NO. 3 STEERING WHEEL LOWER COVER Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.