Removal

BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
* w/ Navigation System:
After the engine switch is turned off, the display and navigation module display (navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Remove the lower No. 1 instrument panel airbag assembly Removal.

3. REMOVE BRAKE PEDAL RETURN SPRING

4. REMOVE PUSH ROD PIN

(a) Remove the clip and push rod pin from the brake pedal lever.

5. REMOVE STOP LIGHT SWITCH ASSEMBLY

(a) Disconnect the stop light switch connector.

(b) Remove the stop light switch Removal.

6. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Remove the brake pedal support reinforcement set bolt.





(b) Remove the hydraulic brake booster assembly Removal.

(c) Remove the brake pedal support assembly.